SAAB WIS ONLINE

PRE-RELEASE

30 15 211 Noise absorbing panels

30 15 211 Noise absorbing panels


Specifications

Teroson Terodem SP 300 T411. Package contains 4 panels 50x50 cm.

Saab application

For floor plate, applied with hot-air gun.

Packaging

1

Transport

No restrictions apply when transporting this product.

Directives



Material safety data sheet


1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING

Product name

Terodem SP 300 (T411)

Supplier

Loctite Sweden AB

Automotive Aftermarket

P.O. Box 8823

SE-402 71 GÖTEBORG

Tel: +46 31 750 54 00

Manufacturer

Henkel Teroson GmbH, Heidelberg, Germany



2. COMPOSITION/INFORMATION ON INGREDIENTS

The product is chemically characterized as sound absorption sheet based on bitumen with paper backing (alu-silver), self adherent. Contains no dangerous constituents above the individual limits laid down in the preparations directive.

3. HAZARDS IDENTIFICATION

No danger to the user is expected if used according to instructions.

4. FIRST AID MEASURES

In case of emergency, ring 112 and ask for poisons information.

5. FIRE-FIGHTING MEASURES

Suitable extinguishing media

No restrictions.



6. SPILLAGE/ACCIDENTAL RELEASE MEASURES

Methods for cleaning up

Take up spillage mechanically. See also under heading 13.



7. HANDLING AND STORAGE

Advice for safe handling

No special measures necessary. Should however not be worked at temperatures < +15°C.

Storage instructions

Store in cool place but not below +10°C. Storage at 15°C to 25°C is recommended.



8. EXPOSURE CONTROLS/PERSONAL PROTECTION

General information

In addition to good working hygiene and standard safety precautions for the handling and use of chemical products, the exposure time for constituent harmful products must be observed. In general, working with chemicals requires adequate ventilation and the use of eye/face protection and protective gloves, if not to avert danger to avoid discomfort, skin reactions, etc. Refer to AFS 1993:40.

Hygiene measures

When using do not eat, drink or smoke. After completion of work and before taking a break, wash hands with soap and water.

Restrictions

There are no restrictions noted in AFS 1996:2 for the substances constituting the product nor for the product as a preparation.



9. PHYSICAL AND CHEMICAL PROPERTIES

The physical and chemical properties specified here are not registered, applicable or relevant to the product as a preparation.

Form/state

Sheet

Odour

None

Colour

Black

Solubility in water

Insoluble

Density

1.950 g/cm 3 at 20°C

Dry content

100 weight % calculated



10. STABILITY AND REACTIVITY

Thermal decomposition

None if used as directed.

Hazardous reactions

None if used as directed.

Hazardous decomposition products:

None if used as directed.



11. TOXICOLOGICAL INFORMATION

General information

PU foam material, from present experience of the relative toxicity (pyrolysis), does not constitute a greater hazard than natural products such as wood, cork, wool and cotton.



12. ECOLOGICAL INFORMATION

Ecotoxicity

No ecotoxic properties known for the product as a preparation.



13. DISPOSAL CONSIDERATIONS

No special measures necessary. Contact your local authority regarding local regulations and recycling of packaging.

14. TRANSPORT INFORMATION

Data regarding the material. Consideration is not taken to possible unrestricted quantities.

Sea (IMDG)

Not hazardous goods.

Land (ADR)

Not hazardous goods.

Air (DGR):

Not hazardous goods.



15. REGULATORY INFORMATION

Symbol

None.

Content

Does not contain any substances requiring declaration at concentrations above the individual limits as per the guidelines for preparations.



16. OTHER INFORMATION

General

In case of persistent headache, nausea or other persistent discomfort during or after work with chemicals, seek medical advice and take along the label or the technical data sheet for the product(s) in question.

Revised version

Due to change of responsibility (distributor).

Validity

There may be a slight delay in relabelling after the given changes, which may lead to discrepancy between the product packaging and this information. The information on this sheet takes precedence.

Replaces

1997-04-24

Issued

1998-01-01




PRE-RELEASE