87 81 718 Silicone grease
|
|
87 81 718 Silicone grease
|
Molykote PG21. Silicone grease for long-term lubrication of plastic/metal, plastic/plastic and rubber/metal combinations. Temperature -50
°
C to +190
°
C. 10 g tube.
Saab 900 M94-: Bushing and clutch lever, for end of clutch wire on clutch pedal.
Saab 9-3: Distribution and heater flap in heating and ventilation unit.
1
No restrictions apply when transporting this product.
Repeated or prolonged contact with scratched or sensitive skin may cause allergic reactions. Avoid skin and eye contact.
|
Material safety data sheet
|
|
1.
|
IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING
Product name
|
Molykote ® PG 21 Plastislip
|
Manufacturer - supplier
|
Dow Corning Europe 62,
Rue General De Gaulle
1310 La Hulpe
Brussels, Belgium
|
Service
|
Dow Corning (Kista)
Tel: +46 (0) 8 7032640
|
Emergencies
|
Dow Corning (Barry, GB 24h)
Tel: +44 1446732350
Dow Corning (Brussels, B)
Tel: +32 2 6552111
|
Health and safety information
|
Health, Environmental and Regulatory Affairs Department, Dow Corning, Brussels, B.
Tel: +32 2 6552523
|
|
|
2.
|
COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous ingredients
|
No hazardous ingredients. In accordance with Council Directive 88/379/EEC (Article 3 6a‘).
|
|
|
3.
|
HAZARDS IDENTIFICATION
Not hazardous.
|
|
4.
|
FIRST AID MEASURES
Inhalation
|
Move to fresh air
|
Skin
|
Wipe away and wash with soap and water.
|
Eyes
|
Rinse with water.
|
Ingestion
|
Treat if signs of damage present.
|
|
|
5.
|
FIRE-FIGHTING MEASURES
Suitable extinguishing media
|
Carbon dioxide, foam, dry powder or fine water spray.
|
Special protective equipment for firefighters
|
A self-contained respirator and protective clothing must be worn for a fire that involves chemicals. Determine the need to evacuate or isolate the area according to your local emergency plan. Keep containers exposed to fire cool with water spray.
|
Combustion products
|
Metal products, carbon dioxide and traces of partially combusted carbon compounds, silica, formaldehyde.
|
|
|
6.
|
SPILLAGE/ACCIDENTAL RELEASE MEASURES
Personal precautions
|
Avoid contact with eyes. Avoid prolonged or repeated contact with skin.
|
Environmental precautions
|
None established. Do not empty large quantities into drains.
|
Methods for cleaning up
|
Scrape up, collect and place in a lockable container.
|
|
|
7.
|
HANDLING AND STORAGE
Advice for safe handling
|
Good ventilation recommended. Avoid contact with eyes. Avoid prolonged or repeated contact with skin.
|
Storage instructions
|
No particular measures required.
|
|
|
8.
|
EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure control
|
See section 7.
|
Limits
|
None of the components have assigned exposure limits.
|
Respiratory equipment
|
Respiratory equipment not normally required.
|
Hand protection
|
Wear plastic or rubber gloves in case of prolonged or repeated contact with the product.
|
Eye protection
|
Wear eye/face protection.
|
Skin protection
|
Further protective equipment not normally necessary.
|
Hygiene measures
|
Exercise good industrial hygiene practice. Wash after handling, especially before eating, drinking or smoking.
|
Other information
|
None known. In accordance with occupational exposure limits (AFS 1993:3).
|
|
|
9.
|
PHYSICAL AND CHEMICAL PROPERTIES
Form/state
|
Grease
|
Odour
|
Very mild
|
Flash point
|
> 200 °C
|
Relative density
|
1.00
|
|
|
10.
|
STABILITY AND REACTIVITY
Stability
|
Stable.
|
Reacts with
|
Can react with strong oxidizing agents
|
Hazardous decomposition products
|
Product may emit small quantities of formaldehyde vapours at temperatures above 150°C.
|
Other information
|
Ensure adequate ventilation.
|
|
|
11.
|
TOXICOLOGICAL INFORMATION
Inhalation
|
No harmful effects normally expected.
|
Skin
|
No harmful effects normally expected.
|
Eyes
|
May cause temporary discomfort.
|
Ingestion
|
No harmful effects normally expected.
|
Other information
|
Based on product test data. Based on assessments from related products. This information is based either on test data, extrapolation from tests on similar materials, review of component data, or a combination of these sources.
|
|
|
12.
|
ECOLOGICAL INFORMATION
Environmental fate and distribution
|
This product is comprised of a silicon polymer with high molecular weight in solid form and other solid materials. Provided this product is not atomized, the risk of atmospheric contamination is small. The product is insoluble in water. It sinks in water since its specific gravity is >1. If this product is present as a component in municipal or industrial waste, it will be enter the ground environment on disposal. The probability of chemical change to the product is however small.
|
Ecotoxicity
|
This product or similar products are non-toxic to the bacteria in sewage sludge. The product is insoluble in water and is not considered to be a risk to aquatic organisms. It is a solid product and does not contain any specific concentrations of any water soluble components that can leach from the product. Therefore, the product is unlikely to be of any danger to soil organisms.
|
Bioconcentration
|
This product is in solid form insoluble in water and is not absorbed on ingestion. Accumulation in body tissue is therefore not possible.
|
Decomposition
|
The product is not biodegradable. More than 80% is removed during sewage processing.
|
|
|
13.
|
DISPOSAL CONSIDERATIONS
Product handling
|
Incineration or disposal in accordance with local regulations.
|
Packaging handling
|
Dispose of packaging in accordance with current regional and/or national regulations.
|
|
|
14.
|
TRANSPORT INFORMATION
Road (ADR)
|
UN-no.
Hazardous goods
Marg no.
|
Class:
free
|
Label
Hazard no.
|
Rail (RID)
|
UN-no.
|
Class:
free
|
Label
Hazard no.
|
Sea (IMDG)
|
UN-no.
Class:
free
|
Page
Label
|
Packing group:
|
IATA (air)
|
UN-no.
|
Class:
free
|
Label
|
Other transport information
|
Not classed as hazardous goods with regard to transport regulations.
|
|
|
15.
|
REGULATORY INFORMATION
R-phrases
|
N/A.
|
Other information
|
No ozone depleting chemicals are present or used in manufacture.
|
|
|
16.
|
OTHER INFORMATION
General information
|
This material safety data sheet was prepared in compliance with Commission Directive 93/112/EC, 67/548/EEC, 91/155/EG and 88/379/EEC as well as their relevant amendments. Adaptations have been made for laws, regulations and administrative provisions relative to the classification, packaging and labelling of dangerous substances and preparations. It is the responsibility of persons in receipt of this material safety data sheet to ensure that the information contained herein is properly read and understood by all people who may use, handle, dispose or in any way come in contact with the product. If the recipient subsequently produces a formulation containing the Dow Corning product, it is the recipient's sole responsibility to ensure the transfer of all relevant information from the Dow Corning Product Safety Data Sheet to their own Product Safety Data Sheet in compliance with Commission Directive 88/379/EEC. In such cases, the material safety data sheet shall be given its full name (e.g. Material Safety Data Sheet or Product Safety Data Sheet). All information and instructions provided in this material safety data sheet are based on the current state of scientific and technical knowledge at the date indicated on the present material safety data sheet. Dow Corning shall not be held responsible for any defect in the product covered by this material safety data sheet, should the existence of such defect not be detectable considering the current state of scientific and technical knowledge.
|
Revised
|
Revised for the 3rd time in accordance with 93/18/EEC, 67/548/EEC and adapted to Council Directive 88/379/EEC.
|
Issued
|
1998-12-10
|
|
