SAAB WIS ONLINE

PRE-RELEASE

Engine oil and oil filter

Engine oil and oil filter


Check for oil leakage

Check that no oil leakage occurs at the top or bottom of the engine and gearbox or in the power steering's hydraulic system.

Engine oil


Change oil. Fill with oil to the MAX mark on the dipstick. The distance between the MAX and MIN marks corresponds to 1 litre (1.05 qts).

Check the level while the engine is still warm, 2-5 minutes after switching it off.

Oil capacity

B204, B234, B235: 4.0 litres (4.2 qts), including filter

Oil type

See Lubricants

Tightening torque:

Drain plug

B204, B234, B235: 25 Nm (18.5 lbf ft)

Check the oil level after changing engine oil and oil filter.

Warning

Make sure the filler cap is screwed on properly after topping up with oil. Oil on the exhaust manifold can cause fires.


Oil filter change



• Loosen the oil filter with the filter wrench and unscrew it. Clean the sealing surface on the engine.

• Oil in the new oil filter's rubber gasket and fit it in place. Tighten the filter by hand.



• Start the engine and check the filter for leaks.


PRE-RELEASE