Outer side reinforcement with outer B-pillar reinforcement, CV
|
|
Outer side reinforcement with outer B-pillar reinforcement, CV
|
|
1.
|
Mount the car in an alignment bench with measuring fixture and cross-measure as necessary.
|
|
2.
|
Remove the side panel.
|
|
3.
|
Remove the door frame.
|
|
4.
|
Cut the B pillar reinforcement at the bottom.
|
|
5.
|
Drill out the spot-welds.
|
|
6.
|
Knock away the reinforcements and align any deformed metal.
|
|
7.
|
Drill out the spot welds securing the remaining sections of B pillar reinforcement and knock it loose.
|
|
8.
|
Grind clean the surfaces to be welded on the new reinforcements.
|
|
9.
|
Grind clean the surfaces to be welded on the body.
|
|
10.
|
Drill holes for plug-welding the bottom of the B pillar reinforcement.
|
|
11.
|
Apply welding primer to the surfaces to be spot welded or plug welded. Use Teroson Zinkspray.
|
|
12.
|
Put the new reinforcements in place and secure them with some welding clamps.
|
|
13.
|
Put the side panel and door frame in place and check the fit.
|
|
14.
|
Remove the side panel and door frame.
|
|
15.
|
Weld on the outer side reinforcement and the B-pillar reinforcement.
|
|
16.
|
Seam weld the top of the B-pillar reinforcement to the side reinforcement.
|
|
17.
|
Plug weld the bottom of the B pillar reinforcement.
|
|
20.
|
Remove any remaining welding primer. Welding primer reduces adhesion of paint, filler and sealant.
|
|
21.
|
Apply primer to all ground surfaces. Use Standox 1K Primer.
|
|
22.
|
Seal joints and sheet metal flanges with sealant. Use Terostat 1K-PUR.
|
|
23.
|
Apply anti-corrosion agent to internal surfaces after painting. Use Terotex HV 400.
|
