PRE-RELEASE
Windscreen member
| Windscreen member |
| 1. |
Drill out the spot-welds.
|
|
| 2. |
Grind down the welds securing the windscreen member to the bottom of the A-pillars and cut the windscreen member.
|
|
| 3. |
Tap loose the windscreen member and align any damaged panels.
|
|
| 4. |
Grind the surfaces to be welded on the body and spare part.
|
|
| 5. |
Apply welding primer on the surfaces to be spot-welded. Use Teroson Zinkspray.
|
|
| 6. |
Fit the spare part and fixate with a couple of welding clamps.
|
|
| 7. |
Spot-weld the new windscreen member.
|
|
| 8. |
All-weld the joints between the windscreen member and the lower ends of the A-pillars.
|
|
| 9. |
Grind the welds.
|
|
| 10. |
Remove any remaining welding primer. Welding primer reduces adhesion of paint, filler and sealant.
|
|
| 11. |
Apply primer to all ground surfaces. Use Standox 1K Primer.
|
|
| 12. |
Seal joints and sheet metal flanges with sealant. Use Terostat 1K-PUR.
|
|
