PRE-RELEASE
Soft top cover foil seal
| Soft top cover foil seal |
| 1. |
Operate the soft top so that the cover is open (vertical).
|
|
| 2. |
Remove the old foil seal.
|
|
| 3. |
Press the foil back into the retainer channel if it has come loose.
|
|
| Fitting |
| 1. |
Remove old sealant from the retainer channel.
|
|
| 2. |
Fetch Teroson Terodicht sealant, black (T242), part no. (16) 30 15 781.
Make the opening of the nozzle smaller with adhesive tape so that it is easier to reach the bottom of the channel. |
|
| 3. |
Apply sealant in the bottom of the channel. Start applying the sealant 20 mm from the channel opening and stop 20 mm from the end of the channel.
|
|
| 4. |
Fit the new seal. Start and finish 2 mm from the channel opening.
|
|
