PRE-RELEASE
Bridge spoiler, rear 5D/3D
| Bridge spoiler, rear 5D/3D |
| 1. |
Remove the wiper arm and open the tailgate.
|
|
| 2. |
Remove the window coverings and trim on the inside of the tailgate.
|
|
| 3. |
Remove the wiper motor as follows:
|
|
| 3.a. |
Unplug the wiper motor connector
|
| 3.b. |
Remove the 3 wiper motor retaining screws.
|
| 3.c. |
Lift out the wiper motor.
|
| 4. |
Remove the spoiler, collect nuts and washers.
|
|
| 5. |
If necessary, remove the zinc tape and clean the tailgate. Affix new zinc tape.
|
|
| 6. |
If necessary, remove seals and clean the spoiler. Fit new seals.
|
|
| Fitting |
| 1. |
Fit the spoiler, 4 nuts with washers.
|
|
| 2. |
Fit the wiper motor.
|
|
| 3. |
Fit the trim on the inside of the tailgate, close the tailgate.
|
|
| 4. |
Fit the wiper arm.
Check the function. |
|
