PRE-RELEASE
Bridge spoiler, rear CV
| Bridge spoiler, rear CV |
| Removing |
| 1. |
Open the tailgate.
|
|
| 2. |
Remove the closing handle and trim on the inside of the boot lid.
|
|
| 3. |
Remove the centre-mounted brake light.
|
|
| 4. |
Remove the rubber plug and rubber bushes. Note how many turns the bushes are screwed in.
|
|
| 5. |
Undo the nuts and lift off the spoiler.
|
|
| 6. |
If necessary, remove the zinc tape and clean the boot lid. Affix new zinc tape.
|
|
| 7. |
If necessary, remove seals and clean the spoiler. Fit new seals.
|
|
| Fitting |
| 1. |
Lift the spoiler into position and fit the washers and nuts.
|
|
| 2. |
Fit the centre-mounted brake light.
|
|
| 3. |
Refit the trim on the inside of the boot lid.
|
|
| 4. |
Fit the rubber plug and rubber bushes.
Adjust the bushes. |
|
| 5. |
Close the boot lid.
|
|
