PRE-RELEASE
Changing the front bumper shell, Aero/Viggen
| Changing the front bumper shell, Aero/Viggen |
| To remove |
| 1. |
Remove the bumper, see
.
|
|
| 2. |
Place the bumper on a protective surface.
|
|
| 3. |
Remove the fog lights. Remove the holder, unscrew the two bolts and undo the nut at the top. Withdraw the fog light.
|
|
| 4. |
Remove the spoiler shield still fixed to the bumper.
|
|
| 5. |
Remove the bumper rail from the 11 clips that secure it to the protective shell and remove it from the shell.
|
|||||||
| 6. |
Remove the cell section from the protective shell (wedged under the corners of the protective shell).
|
|
| 7. |
Remove the 8 clips securing the bumper grille and remove the grille. Remove the band securing the cover for the towing eye.
|
|
| To fit |
| 1. |
Fit the grille in the bumper and refit the band for the towing eye cover.
|
|
| 2. |
Press the cell section into the protective shell.
|
|
| 3. |
Refit the rail in the protective shell.
|
|||||||
| 4. |
Fit the spoiler shield.
|
|
| 5. |
Fit the fog lights.
|
|
| 6. |
Refit the bumper, see
|
|
| 7. |
Check the headlamp alignment and adjust if necessary.
|
|
