PRE-RELEASE
Changing the rear bumper shell, Aero/Viggen
| Changing the rear bumper shell, Aero/Viggen |
| Removing |
| 1. |
Remove the bumper, see
. Place it on a surface where it will be well protected.
|
|
| 2. |
Remove the upper cell block.
|
|
| 3. |
Remove the bumper rail from the protective shell by removing it from the 14 retaining clips that secure it to the protective shell.
|
|
| 4. |
Remove the cell block from the shell (wedged in the shell fastening lugs).
|
|
| Fitting |
| 1. |
Press the cell section into the protective shell.
|
|
| 2. |
Refit the rail in the protective shell.
|
|||||||
| 3. |
Fit the upper cell block.
|
|
| 4. |
Refit the bumper, see
|
|
