PRE-RELEASE
Outer scuff plate, 3D
| Outer scuff plate, 3D |
| Removing |
| 1. |
Remove the mudguard
|
|
| 2. |
Remove the sill moulding.
|
|
| 3. |
Remove the plastic nuts securing the sill scuff plate.
|
|
| 4. |
Remove the front sill scuff plate from the weld bolts.
|
|
| 5. |
Remove the rear sill scuff plate from the weld screws. Pull the sill scuff plate rearwards to loosen it from the guide at the top edge.
|
|
| Fitting |
| 1. |
Refit the sill scuff plate by pushing it on to the guides in the top, then press the plastic nuts into place.
|
|
| 2. |
Guide in the front sill scuff plate in the wheel housing and fit it over top of the weld screws.
|
|
| 3. |
Tighten the plastic nuts.
|
|
| 4. |
Fit the lower moulding.
|
|
| 5. |
Fit the mudguard.
|
|
