PRE-RELEASE
Stone damage tape, 3D
| Stone damage tape, 3D |
| Removing |
| 1. |
Remove the plastic nuts that hold the rear outer sill scuff plate. Pull it rearwards and lift away the sill scuff plate.
|
|
| 2. |
Press out the two upper clips of the stone damage protection from the inside of the wheel housing.
|
|
| 3. |
Remove the lower clip by pulling and remove the stone damage protection.
|
|
| Fitting |
| 1. |
Fit the stone damage protection and press in the lower clip.
|
|
| 2. |
Press in the two upper clips.
|
|
| 3. |
Refit the sill scuff plate by pushing it on to the guides in the top, then press the plastic nuts into place.
|
|
