PRE-RELEASE
Long-load opening hatch
| Long-load opening hatch |
| To remove |
| 1. |
Remove the centre armrest, see page 852-26.
|
|
| 2. |
Open the long-load hatch.
|
|
| 3. |
Press down the padding at the bottom of the long-load opening so that the mountings for the hatch become accessible, one mounting on each side of the hatch.
|
|
| 4. |
Press out the bushes in the centre of the joint with a chisel, pressing them in towards the hatch.
|
|
| 5. |
Release the joint sleeve (a plastic bush with hooks) with a pair of pliers and press them out.
|
|
| 6. |
Lift out the long-load opening hatch.
|
|
| To fit |
Fit in reverse order.
