PRE-RELEASE
Rear seat belts, CV
| Rear seat belts, CV |
| To remove |
| 1. |
Remove the rear side trim. See
Removing
.
|
|
| 2. |
Remove the bolt securing the seat belt to the floor.
|
|
| 3. |
Remove the bolt securing the strap guide.
|
|
| 4. |
Remove the clip securing the upholstery above the long-load opening.
|
|
| 5. |
Remove the clips securing the upholstery below the long-load opening.
|
|
| 6. |
Move aside the upholstery and remove the bolt securing the seat belt reel.
|
|
| 7. |
Remove the seat belt.
|
|
| To fit |
| 1. |
Fit the seat belt reel and tighten the bolt.
Tightening torque 45 Nm (33.3 lbf ft) |
|
| 2. |
Fit the upholstery in place and press on the clips securing it under the long-load opening. See
Fitting
.
|
|
| 3. |
Fasten the clips securing the upholstery above the long-load opening.
|
|
| 4. |
Fit the strap guide and tighten the bolt.
Tightening torque 45 Nm (33.3 lbf ft) |
|
| 5. |
Tighten the bolt securing the seat belt to the floor.
Tightening torque 45 Nm (33.3 lbf ft) |
|
