PRE-RELEASE
Backrest, 60-percent
| Backrest, 60-percent |
| 1. |
Remove the 40 per cent part, .
|
|
| 2. |
Release the backrest from the seat-belt member.
|
|
| 3. |
Fold forward the backrest.
|
|
| 4. |
Remove the centre seat-belt mounting to access the right-hand backrest mounting.
|
|
| 5. |
Remove the right-hand backrest mounting.
|
|
| 6. |
Pull out the free end of the backrest and remove the joint pin from its mounting by the wheel housing.
|
|
| 7. |
Detach the upholstery tensioner and lift out the backrest.
|
|
| To fit |
Fit in reverse order
| Note | ||
|
When fitting the centre seat-belt mounting, the upper and lower parts must be located in each other and a locating stud in the floor. |
