PRE-RELEASE
Seat cushion, rear seat, 3D/5D
| Seat cushion, rear seat, 3D/5D |
| 1. |
Put the seats in an upright position (both the 60 and 40-percent parts).
|
|
| 2. |
Remove the lock clip on the hinge pins.
|
|
| 3. |
Tap out the 4 pins from the hinges, 2 on each seat.
|
|
| 4. |
Lift out the seats.
|
|
| To fit |
Fit in reverse order
| Note | ||
|
Insert the hinge pins on the 60-percent part and the outer pin on the 40-percent part from right to left. The inner pin on the 40-percent part is inserted from left to right. |
