PRE-RELEASE
Pressure release valve
| Pressure release valve |
| 1. |
Raise the car and remove the right-hand front wheel.
|
|
| 2. |
Remove the plug from the timing cover.
|
|
| 3. |
Remove the seal, spring and valve.
|
|
| To fit |
| 1. |
Clean all the parts. Replace with new parts if necessary.
|
|
| 2. |
Fit the valve, spring and a new seal.
|
|
| 3. |
Tighten the plug.
Tightening torque 45 Nm (33 lbf ft) |
|
| 4. |
Fit the wheel. Refer to
Wheels
Tightening torque 110 Nm (81 lbf ft) |
|
| 5. |
Lower the car. Check the oil level. Top up if necessary.
|
|
