PRE-RELEASE
Drive belt, auxiliary equipment (multigroove)
| Drive belt, auxiliary equipment (multigroove) |
| To remove |
| 1. |
Raise the car and undo the front part of the right wing liner.
|
|
| 2. |
Relieve the belt tensioner using
83 96 095 Belt circuit relieving tool B207
and remove the belt.
|
|
| To fit |
| 1. |
Relieve the belt tensioner with
83 96 095 Belt circuit relieving tool B207
and fit the drive belt.
|
|
| 2. |
Check the position of the belt on all the pulleys.
|
|
| 3. |
Fit the screws and nut for the right wing liner.
|
|
| 4. |
Lower the car, start the engine and check the function of the belt.
|
|
