PRE-RELEASE
Exhaust temperature sensor (602)
| Exhaust temperature sensor (602) |
|
|||||||
Warning
| To remove |
| 1. |
Unplug the connector for the temperature sensor, detach is from its holder and carefully lower the cable.
|
|
| 2. |
Raise the car.
|
|
| 3. |
Remove the lower turbocharger pressure pipe.
|
|
| 4. |
Bend out the corner of the heat shield slightly.
|
|
| 5. |
Remove the temperature sensor.
|
|
| To fit |
| 1. |
Lubricate the threads sparingly with
30 20 971 Screw-thread paste
and fit the temperature sensor.
Tightening torque 45 Nm (33 lbf ft). |
|
| 2. |
Lift up the temperature sensor cable, making sure it does not get pinched or is exerted to chafing.
|
|
| 3. |
Bend the corner of the heat shield back in place.
|
|
| 4. |
Fit the turbocharger delivery pipe.
Tightening torque 22 Nm (16 lbf ft). |
|
| 5. |
Lower the car.
|
|
| 6. |
Plug in the temperature sensor connector and secure it.
|
|
