PRE-RELEASE
Lower heated oxygen sensor (593)
| Lower heated oxygen sensor (593) |
|
|||||||
Warning
| To remove |
| 1. |
Unplug the connector for the oxygen sensor and carefully lower the cable.
|
|
| 2. |
Raise the car.
|
|
| 3. |
Remove the lower turbocharger pressure pipe.
|
|
| 4. |
Run the cable forward and remove the oxygen sensor.
|
|
| To fit |
| 1. |
Lubricate the threads sparingly with
30 20 971 Screw-thread paste
and fit the oxygen sensor.
Tightening torque 40 Nm (30 lbf ft). |
|
| 2. |
Make sure the cables are NOT twisted or damaged.
|
|
| 3. |
Lift up the oxygen sensor cable, making sure it does not get pinched or is exerted to chafing.
|
|
| 4. |
Fit the turbocharger delivery pipe.
Tightening torque 22 Nm (16 lbf ft). |
|
| 5. |
Lower the car.
|
|
| 6. |
Plug in the oxygen sensor connector and secure it.
|
|
