(365-2424) Reprogramming the REC after fitting new electronic unit for a trailer
|
TECHNICAL SERVICE BULLETIN
|
|
Bulletin Nbr:
|
365-2424
|
|
Date:
...........
|
November 2003
|
|
Market:
|
all
|
|
|
Reprogramming the REC after fitting new electronic unit for a trailer
|
Saab 9-3 (9440) 4D up to and including Vehicle Identification Number 41010294
Saab 9-3 (9440) CV up to and including Vehicle Identification Number 46003447
After fitting a new electronic unit for a trailer (part no. 12803356 - CA: 40 12803356) the software in the luggage compartment electrical centre (REC) must be updated so that full functionality is achieved.
|
Note
|
|
The following special equipment is required in order to carry out this work:
|
|
-
|
PC with TIS2000 version 2003-3 (or later) installed
|
|
-
|
Hardware lock with adapter
|
|
-
|
PC cable with RS232 adapter
|
|
-
|
Tech2 with 32 Mb card, version 107.000 (or later)
|
|
-
|
CANdi box
|
|
Always use the latest versions of TIS2000 and Tech2.
|
|
Note
|
|
No PC in proximity to the car:
If Tech2 is disconnected from the car, the CANdi box should also be disconnected from Tech2. The CANdi box may remain connected to the car's data link connector.
|
|
1.
|
Connect the battery charger to the car battery.
|
|
2.
|
Connect Tech2 to the car's data link connector and to a PC with TIS2000.
|
|
3.
|
Get Security Access to Tech2 from the car.
|
|
4.
|
Request control module data from REC using Tech2.
|
|
5.
|
Download the SPS program from TIS2000 to Tech2.
|
|
6.
|
Download security access from TIS2000 to Tech2.
|
|
7.
|
SPS program the REC.
|
Note
|
|
No special action is required during the programming phase. Follow the instructions in TIS2000 and Tech2 for SPS. The programming will stop for several seconds during the programming phase, which is normal.
|
|
|
9.
|
Disconnect the battery charger from the car.
|
|
10.
|
Read diagnostic trouble codes to ensure that no faults remain.
|
|
11.
|
Disconnect Tech2 from the car's data link connector.
|
|
Warranty/Time information
|
In the case of customer complaint and if the car is
within the warranty period
, use the following information to fill out the claim:
Failed Object: 37170
Fault/Reason code: 61
Location code: 09 (US: 9)
Warranty Type (US): 01
Repair/Action code: 05
Labour Operation (US): 37170-06
Labour Operation (CA): N4808
Time: 0.3 hr
