Gear selector control module (726)
|
|
Gear selector control module (726)
|
To convey information to TCM if shifting up or down is done in gear position "M".
To inform
Ignition switch module
that gear position "P" has been selected.
To indicate with LEDs in the gear selector coulisse the gear position that is currently selected, P-R-N-D or M.
Microprocessor with integrated Hall sensor.
The SLM control module is powered with +30 on pin 2 from main fuse box 22, fuse 5. Grounding takes place on pin 3, grounding point G41. Bus communication (I-bus) takes place on pin 12. Communication regarding up or down shifting in position "M" takes place from pin 7 on SLM to pin 8 (A) on TCM.
|
Pin no.
|
Interface
|
Description
|
|
2
|
+ 30
|
Supply from main fuse box 22
|
|
3
|
ground
|
grounding point G41
|
|
12
|
Bus
|
I-bus
|
|
7
|
|
Up and down shifting to pin 8 (A) on TCM
|
|
•
|
Power supply, ground and bus connection
|
|
•
|
Communication with TCM
|
