PRE-RELEASE
Brake caliper, front
| Brake caliper, front |
| To remove |
| 1. |
Raise the car.
|
|
| 2. |
Remove the wheel.
|
|
| 3. |
Press in the piston.
|
|
| - |
Level 1 and 2:
Press in the brake pad by prising with a screwdriver.
|
| - |
Level 3:
Prise between the brake disc and the brake caliper using a screwdriver.
|
| 4. |
Depress the brake pedal slightly using a brake pedal clamp.
|
|
| 5. |
Remove fuse 6 from the instrument panel electrical centre 22.
Instrument panel electrical centre 22 (IPEC)
.
|
|
| 6. |
Detach the brake hose. Plug the hose and the caliper.
|
|
| 7. |
Remove the brake caliper retaining bolts and lift of the caliper.
|
|
| To fit |
| 1. |
Fit the brake caliper. Secure with
74 96 268 Nut lock.
Tightening torque 210 Nm +30° Nm (155 lbf ft +30°) 
|
|
| 2. |
Fit the brake hose with new seals.
Tightening torque: 40 Nm (30 lbf ft) |
|
| 3. |
Remove the brake pedal clamp and refit fuse 6 in the instrument panel electrical centre 22.
|
|
| 4. |
Bleed the brake system
.
|
|
| 5. |
Fit the wheel
.
|
|
| 6. |
Lower the car.
|
|
| 7. |
Depress the brake pedal repeatedly in order to press out the brake pistons.
|
|
| 8. |
Check the brake fluid level, adjust if necessary.
Technical data, brake fluid
.
|
|
