PRE-RELEASE
Springs
| Springs |
| To remove |
| 1. |
Raise the car.
|
|
| 2. |
Remove the wheel.
|
|
| 3. |
Remove the spring from the brake caliper.
|
|
| 4. |
Remove the protective covers.
Remove and move aside the hydraulic body. Remove the outer brake pad. |
|
| 5. |
Compress the spring with
88 18 791 Spring compressor
and the small jaws and lift out the spring. Remove the spring from the tool.
|
|
| To fit |
| 1. |
Compress the spring with
88 18 791 Spring compressor
and place the spring support in the spring.
|
|
| 2. |
Lift the spring into position. Remove the spring compressor.
|
|
| 3. |
Remove the inner brake pad and screw in the brake piston using
89 96 969 Resetting tool
and
89 96 977 Adapter
.
|
|
| 4. |
Fit the brake pads.
|
|||||||
| 5. |
Fit the hydraulic body.
Tightening torque 28 Nm (21 lbf ft) Fit the protective covers. 
|
|
| 6. |
Fit the spring to the brake caliper.
|
|
| 7. |
Fit the wheel
.
|
|
| 8. |
Lower the car to the floor.
|
|
| 9. |
Depress the brake pedal several times to press out the self adjustment of the brake pistons and the parking brake.
|
|
