PRE-RELEASE
Centre grille
| Centre grille |
| To remove |
| 1. |
Remove the
front bumper shell
.
|
|
| 2. |
Bend out the lower catches from the inside of the shell using a screwdriver to release the catches from the grille. Then continue around the entire grille until all the catches have released.
|
|
| 3. |
Then press in the upper lock tabs using a screwdriver so that the guide tabs
(A)
release.
|
|
| 4. |
Remove the grille.
|
|
| To fit |
| 1. |
Use the guide tabs to steer the grille into place. Press in the grille so that the catches fasten. Check that all catches are fastened.
|
|
| 2. |
Fit the
front bumper shell
.
|
|
