PRE-RELEASE
Protective moulding, rear door
| Protective moulding, rear door |
| To remove |
| 1. |
Use
82 93 474 Removal tool
.
|
|
| 2. |
Fit the tool in under the moulding. Begin from the rear and release the moulding clips from the door. Free the hook.
|
|
| To fit |
| 1. |
Check that the plastic sleeves in the door are whole. Replace if necessary.
|
|
| 2. |
Guide the hook in the front hole of the rear door and guide the front guide clip in first. Press the other clips into place.
|
|
| 3. |
Check the fit of the moulding.
|
|
