PRE-RELEASE
(02-11-103) Modification of Break Out cable for airbag control module
Symptom: The 30-pin connector on 86 12 764 Break Out cable, airbag control module (ACM) cannot be connected to the car's wiring harness.
| TECHNICAL ADVICE - Quick information for your help | |
| Bulletin Nbr: | 02-11-103 |
| Date: ........... | November 2002 |
| Market: | Alla |
| Modification of Break Out cable for airbag control module |
| Cars affected |
SAAB 9-3 (9440) M03-
| Background |
Our ambition has been to provide several model years with 86 12 764 Break Out cable, airbag control module (ACM). This is not always possible with the current connector coding.
Symptom description
The 30-pin connector on 86 12 764 Break Out cable, airbag control module (ACM) cannot be connected to the car's wiring harness.| Parts required |
Drill
Drill bit 2.5 mm
Vice
| Procedure |
| 1. |
Carefully secure the 30-pin connector in a vice.
|
|
| 2. |
Remove the coding with the drill down to the bottom of the connector.
|
|||||||
| 3. |
Remove the burrs. There will be a hole in the side of the connector after modification.
|
|
