PRE-RELEASE
Window lift motor, front
| Window lift motor, front |
| To remove |
| 1. |
Remove
Door trim, front, 4D
and fold down the water barrier.
|
|
| 2. |
Remove the bolts securing the electric motor.
|
|
| 3. |
Lift out and unplug the motor.
|
|
| To fit |
| 1. |
Guide in the motor using the locating pins.
|
|
| 2. |
Plug in the connector.
|
|
| 3. |
Fit the bolts securing the motor.
|
|
| 4. |
Plug in the window lift connector to the door trim. Close and open the window a few times to check its operation.
|
|
| 5. |
Fit the water barrier and
Door trim, front, 4D
.
Cars with pinch protection: Perform Calibration of pinch protection . |
|
