PRE-RELEASE
PDM / B3057 48
Read the instructions below then start the fault diagnostic procedure.
Symptom: Car does not start.
| B3057 48 |
Control Module not Added
Fault symptom
Car does not start.On-board diagnosis
Type of diagnosis:
| Continuous |
Enable criteria:
| Diagnostics run when ignition is ON. |
Fault criteria:
| Control Module Not Added |
Diagnostic help
Control module was not added.See "Procedure after fitting the control module"
Diagnostic help
Functions in the diagnostic tool related to the fault:
| See menu "All - Add/Remove" |
