PRE-RELEASE
Cylinder head, flatness check
| Cylinder head, flatness check |
| 1. |
Clean the sealing surfaces and remove remains of sealant.
|
|
| 2. |
Cylinder head dismantled.
|
|
| 3. |
Check concavity on cylinder head sealing surfaces length and width and distortion diagonally. Use a straight-edge rule.
Caution the cylinder head must not be refaced |
|
| 4. |
Cylinder head height (sealing surface to sealing surface):
|
|
| 5. |
Dimension (I) - 135.85 - 136.0 mm.
|
|
