PRE-RELEASE
(248-2470) Upgrading of software in engine management system, Simtec Z18XE
Symptom: - Diagnostic trouble code P0335, symptom 8 - CHECK ENGINE - Car in Limp Home
| MODIFICATION INSTRUCTION | |
| Bulletin Nbr: | 248-2470 |
| Date: ........... | maj 2004 |
| Market: | EU |
| Upgrading of software in engine management system, Simtec Z18XE |
| Customer Satisfaction Campaign 154 30 |
Cars in stock must be rectified before delivery.
A personal communication must be sent to the owners of cars already delivered requesting them to get in touch with the nearest Saab garage as soon as possible to have the fault rectified.
| Cars affected |
Saab 9-3 M04 with engine alternative Z18XE with any of the following Vehicle Identification Numbers beginning with 410 and the subsequent numbers:
48015, 48021, 48026, 48043, 48051, 48054, 48060, 48066, 48210, 48218, 48224, 48229, 48240, 48257, 48262, 48265, 48269, 48278, 48316, 48320, 48323, 48330, 48338, 48342, 48401, 48414, 48425, 48432, 48440, 48448, 48467, 48474, 48482, 48497, 48550, 48571, 48585, 48591, 48606, 48609, 48613, 48616, 48619, 48622, 48625, 48629, 48632, 48637, 48646, 48653, 48657, 48665, 48671, 48674, 48683, 48689, 48763, 48791, 48814, 48822, 48825, 48856,
48860, 48882, 48886, 48892, 48897, 48902, 48905, 48911, 48915, 48919, 48922, 48925, 48928, 48934, 48937, 48943, 48947, 48951, 48957, 48966, 48971, 48981, 48985, 48996, 49000, 49008, 49014, 49024, 49040, 49045, 49061, 49065, 49080, 49083, 49107, 49111, 49116, 49134, 49141, 49168, 49190, 49203, 49302, 49305, 49309, 49317, 49324, 49327, 49331, 49336, 49341, 49344, 49353, 49357, 49369, 49373, 49400, 49425, 49451, 49480, 49511, 49516,
49520, 49535, 49538, 49542, 49545, 49553, 49562, 49565, 49654, 49658, 49665, 49671, 49675, 49680, 49688, 49694, 49733, 49750, 49769, 49791, 49794, 49831, 49849, 49871, 49884, 49943, 49956, 49959, 49970, 49976, 52031, 52351
| Background |
The engine's crankshaft position sensor provides an incorrect signal so that the CHECK ENGINE lamp comes on and diagnostic trouble code P0335, symptom 8 is indicated. The car adopts Limp Home.
Symptom description
- Diagnostic trouble code P0335, symptom 8- CHECK ENGINE
- Car in Limp Home
| Parts required |
New software, see below
For fitting the modification identity plate:
12 785 148 Modification identity plate16-30 15 815 Cleaner, Teroson FL 875, sufficient for 50-100 cars.
| Procedure |
Before proceeding, check box A2 of the modification identity plate. From and including M04 there is the table "Table of Modifications" in the car's Warranty and Service Book. A modification identity plate must be fitted in accordance with the section "Fitting the modification identity plate" where local directives require the marking of the car. If the box is not marked, continue as follows.
| 1. |
Reprogram the engine management system. Use software 6577915105. See WIS - General - General - Technical data - Service programming.
Use TIS2000, version 2004-2, update 1. |
|
| Marking the modification identity plate |
After carrying out the procedure, box A2 on the modification identity plate must be marked. From and including M04 there is the table "Table of Modifications" in the car's Warranty and Service Book. Mark the box with the number "7" if the procedure was carried out by the importer or with the number "8" if carried out by the dealer.
| Fitting the modification identity plate |
| Note | ||
|
A modification identity plate must only be fitted where local directives require the marking of the car. |
| • |
Fit the modification identity plate in accordance with WIS - 9-3 (9440) M04 - General - General -Technical data - Plates and labels
|
|
| Standard times-/Warranty information |
See separate information.
