Auxiliaries drive belt (poly-V-belt)
|
|
Auxiliaries drive belt (poly-V-belt)
|
(in-situ)
|
1.
|
Raise the car and remove the front spoiler shield. Disconnect the headlight washer hose and unplug and remove the connector.
|
|
2.
|
Free the front part of the right-hand wing liner.
|
|
3.
|
Detension the belt tensioner and remove the drive belt. Use a 19 mm wrench.
|
|
1.
|
Detension the belt tensioner and fit the poly-V-belt.
|
|
2.
|
Check the position of the belt on all the pulleys.
|
|
3.
|
Fit the front part of the right-hand wing liner.
|
|
4.
|
Fit the front spoiler shield and fit the headlight washer hose. Fit and plug in the connector.
|
|
5.
|
Lower the car. Start the engine and check the function of the belt.
|
