PRE-RELEASE
Engine block
| Engine block |
| Cylinder bore |
| Classification codes | ||
| 8 | mm | 83.975-83.985 |
| 99 | mm | 83.985-83.995 |
| 00 | mm | 83.995-84.005 |
| 01 | mm | 84.005-84.015 |
| 02 | mm | 84.015-84.025 |
The new cylinder classification marking must be applied after reboring the cylinders.
| Cylinder block |
| Height, new cylinder block (The cylinder block must not be planed.) | mm | 242.2 |
| Cylinder head |
| Height, new cylinder head (The cylinder head must not be planed.) | mm | 140 |
Cylinder head gaskets
| Level difference, pistons | Thickness, gasket | Marking |
| 0.40 - 0.50 mm | 1.2 mm | No notch |
| 0.51 - 0.60 mm | 1.3 mm | 1 notch |
| 0.61 - 0.70 mm | 1.4 mm | 2 notches |
| Control values, pressure |
| Compression | bar | 27-29 (The difference between the cylinders must not exceed 100 kPa.) |
| Compression ratio | 19.5:1 |
