PRE-RELEASE
Crankshaft position sensor (345)
| Crankshaft position sensor (345) |
| To remove |
| 1. |
Remove the upper engine cover.
|
|
| 2. |
Unplug the position sensor.
|
|
| 3. |
Raise the car.
|
|
| 4. |
Remove the lower engine cover.
|
|
| 5. |
Undo the two bolts securing the coolant pipe.
|
|
| 6. |
Move the coolant pipe forward.
|
|
| 7. |
Remove the sensor.
|
|
| To fit |
| 1. |
Fit the sensor. Grease the O-ring sparingly with vaseline.
|
|
| 2. |
Draw up the wiring.
|
|
| 3. |
Fit the two bolts securing the coolant pipe.
|
|
| 4. |
Fit the lower engine cover.
|
|
| 5. |
Lower the car.
|
|
| 6. |
Plug in the position sensor.
|
|
| 7. |
Replace the upper engine cover.
|
|
