PRE-RELEASE
Pressure monitor, engine oil (44)
| Pressure monitor, engine oil (44) |
| To remove |
| 1. |
Raise the car and remove the lower engine cover.
|
|
| 2. |
Unplug the oil pressure sensor.
|
|
| 3. |
Place a suitable receptacle under the engine and remove the engine oil pressure sensor.
|
|
| To fit |
| 1. |
Fit the engine oil pressure sensor with a new seal.
Tightening torque 30 Nm (22 lbf ft) 
|
|
| 2. |
Plug in the sensor connector and wipe away any oil spills.
|
|
| 3. |
Fit the lower engine cover and lower the car.
|
|
| 4. |
Check the oil level. Top up if necessary.
|
|
