(291-2503) Bypass valve diaphragm available as spare part
|
TECHNICAL SERVICE BULLETIN
|
|
Bulletin Nbr:
|
291-2503
|
|
Date:
...........
|
November 2004
|
|
Market:
|
Ej US, CA
|
|
|
Bypass valve diaphragm available as spare part
|
9-3 (9440) with engine alternative B207E/L
The bypass valve diaphragm is currently available as a separate spare part. To replace the bypass valve diaphragm, use the following methods.
|
Removing the bypass valve diaphragm
|
|
1.
|
Remove the mass air flow sensor connector and the hoses.
|
|
2.
|
Remove the air cleaner casing cover and the intake hose to the turbo.
|
|
3.
|
Remove the hose from the turbo's bypass valve.
|
|
4.
|
Unscrew the valve's cover, hold the cover firmly when the screws are removed.
|
|
5.
|
Lift the cover away and replace the parts.
|
|
Fitting the bypass valve diaphragm
|
|
1.
|
Clean the cover and the turbo from gasket residue.
|
|
2.
|
Fit the diaphragm kit as illustrated.
|
|
3.
|
Fit the cover to the turbo. Use the new screws and the new gasket. Apply a thin layer of non-acidic Vaseline to the cover, to retain the gasket.
Tightening torque 8 Nm (6 lbf ft).
|
|
4.
|
Fit the hose to the turbo's bypass valve.
|
|
5.
|
Fit the air cleaner casing cover and the intake hose to the turbo.
|
|
6.
|
Connect the mass air flow sensor connector and fit the hoses.
|
|
7.
|
Check the bypass valve, see the instructions below.
|
|
8.
|
Remove the wing cover.
|
|
Checking the bypass valve
|
|
1.
|
Detach the vacuum hose from the bypass valve.
|
|
2.
|
Connect 30 14 883 Pressure/vacuum pump, and create a vacuum in the valve.
|
|
3.
|
Check that the diaphragm is intact. If the diaphragm is damaged then the vacuum is released.
|
|
4.
|
Pump up an overpressure in the valve.
|
|
5.
|
Check that the diaphragm is intact. If the diaphragm is damaged then the overpressure is released.
|
|
7.
|
Connect the vacuum hose.
|
|
Warranty/Time Information
|
In the case of customer complaint and if the car is
within the warranty period
, use the following information to fill out the claim:
Failed Object: 29153
Repair/Action code: 01 and 08
Time, checking: 0.1 hr
Time, replacement: 0.3 hr
