PRE-RELEASE
Flywheel, remove and install, Z18XE
| Flywheel, remove and install, Z18XE |
| To remove |
| 1. |
Remove the gearbox and the clutch pressure plate - see
Gearbox, to remove and to fit
and
Clutch assembly
.
|
|
| 2. |
Block the flywheel using KM-652 or
83 94 868 Flywheel locking attachment
(1) and remove it from the crankshaft.
Cut along the threads in the crankshaft |
|
| To fit |
| 1. |
Fit the flywheel on the crankshaft with new bolts - tightening torque 35 Nm + 30° + 15°.
|
|
| 2. |
Block the flywheel when tightening with KM-652 or
83 94 868 Flywheel locking attachment
(2).
|
|
| 3. |
Fit the gearbox and the clutch pressure plate, see
Gearbox, to remove and to fit
and Clutch assembly.
|
|
