PRE-RELEASE
Intermediate shaft bearing, 4-cyl diesel
| Intermediate shaft bearing, 4-cyl diesel |
| To remove |
| 1. |
Remove the bearing carrier.
|
|
| 2. |
Remove the circlip.
|
|
| 3. |
Press out the shaft from the bearing with a hydraulic press and
89 96 670 Wrench, shock absorber insert
and
87 92 236 Support, for fitting F35 speed gear
.
|
|
| 4. |
Press out the bearing with
87 91 311 Sleeve, driver shaft bearing
.
|
|
| To fit |
| 1. |
Press in the new bearing with
87 90 859 Press sleeve
. Use
87 90 461 Sleeve, bearing ring
for support.
|
|
| 2. |
Press on the intermediate shaft with
87 90 487 Sleeve, differential bearing
.
|
|
| 3. |
Fit the circlip.
|
|
| 4. |
Fit the bearing carrier.
Tightening torque 10 Nm (7 lbf ft) |
|
