PRE-RELEASE
Moist with oil at mating surface on gearcase
Symptom: Moist with oil on bottom part of gearcase at mating surface clutch housing - gearcase.
| Moist with oil at mating surface on gearcase |
Fault symptoms
Moist with oil on bottom part of gearcase at mating surface clutch housing - gearcase.Conditions
Oil moisture can occur at the locations described above because bolts with steel grade 8.8 cannot be tightened with sufficient torque.Action
Change bolts to new steel grade 10.9 as illustrated.
| Note | ||
|
Tightening torque has been changed for the new bolts. |
Tightening torque, pos A-C, 31 Nm (23 lbf ft)
Tightening torque, pos D, 20 Nm +45° (15 lbf ft +45°)
