Power steering return line, LHD
|
|
Power steering return line, LHD
|
|
Important
|
|
Scrupulous cleanliness must always be observed during all work with hydraulic components.
|
|
|
|
1.
|
Remove the driver-side wheel.
|
|
2.
|
Open the reservoir cap.
|
|
3.
|
Raise the car.
Diesel engine:
Remove the lower engine cover.
|
|
4.
|
Disconnect the return line from the steering gear and allow the fluid to drain into a suitable receptacle.
|
|
5.
|
Lower the car to the floor.
|
|
6.
|
Remove the line from the reservoir.
|
|
7.
|
Raise the car and pull our the line from under the car.
|
|
1.
|
Fit the line in place.
|
|
2.
|
Attach the line to the steering gear. Make sure the O-ring is correctly seated.
Tightening torque 28 Nm (21 lbf ft)
Diesel engine:
Fit the lower engine cover.
|
|
3.
|
Lower the car to the floor.
|
|
4.
|
Attach the line to the power steering fluid reservoir.
|
|
6.
|
Fit the
wheel
.
Tightening torque 110 Nm (81 lbf ft)
|
