PRE-RELEASE
Bush, longitudinal link
| Bush, longitudinal link |
| To remove |
| 1. |
Remove the longitudinal link
.
|
|
| 2. |
Clamp the longitudinal link in a vice.
|
|
| 3. |
Use
83 90 122 Drift
and
87 91 188 Support, for removing pinion shaft
and press out the bush.
|
|
| To fit |
| 1. |
Position the bush. An imaginary line from the recesses in the centre of the bush should be aligned with the upper edge of the upper hole in the longitudinal link.
|
|
| 2. |
Use
83 90 122 Drift
and
87 91 188 Support, for removing pinion shaft
to press in the bush. The bush should protrude 14 mm above the flat side of the link arm.
|
|
| 3. |
Fit the longitudinal link
.
|
|
