PRE-RELEASE
Rear spoiler (Aero)
| Rear spoiler (Aero) |
| To remove |
| 1. |
Open the boot lid.
|
|
| 2. |
Remove the grab handle.
|
|
| 3. |
Remove the clips securing the trim.
|
|
| 4. |
US/CA: Remove the emergency opening handle from the trim. Detach the cable from the handle.
|
|
| 5. |
Bend aside the trim slightly from the cover on the lock. Pull out the rear trim clips. Remove the trim from the boot lid.
|
|
| 6. |
Remove the spoiler bolts.
|
|
| 7. |
Remove the spoiler from the boot lid.
|
|
| To fit |
| 1. |
Clean the surface of the boot lid.
|
|
| 2. |
Remove the tape protector from the spoiler.
|
|
| 3. |
Guide the spoiler into position.
|
|
| 4. |
Fit the bolts securing the spoiler.
|
|
| 5. |
Lift up the trim.
US/CA: Pass the emergency opening handle through the trim. |
|
| 6. |
Guide the trim into position relative to the lock cover.
|
|
| 7. |
Guide in the trim's locating clips and press the rear clips home.
|
|
| 8. |
Fit the clips.
|
|
| 9. |
Fit the grab handle.
|
|
| 10. |
US/CA: Attach the emergency opening handle to the cable. Fit the handle to the trim. Check the function of the emergency opening handle.
|
|
| 11. |
Close the boot lid.
|
|
