PRE-RELEASE
Air recirculation flap stepping motor
| Air recirculation flap stepping motor |
| To remove |
| 1. |
Remove the
glove box
.
The air recirculation flap stepping motor is located on the fan housing's outer end. 
|
|
| 2. |
Dismantle the stepping motor's connector by pressing in the lock and pulling out the connector.
|
|
| 3. |
Dismantle the air recirculation flap's stepping motor.
|
|
| To fit |
| 1. |
Fit the air recirculation flap's stepping motor.
|
|
| 2. |
Connect the stepping motor's connector. Make sure the connector locks correctly.
|
|
| 3. |
Refit the
glove box
.
|
|
