PRE-RELEASE
Multi-belt, change
| Multi-belt, change |
| To remove |
| 1. |
Open the bonnet
|
|
| 2. |
Raise the car
|
|
| 3. |
Undo the wing liner at the front.
|
|
| 4. |
Remove the multi-belt
Tension the multi-belt tensioning device in the direction of the arrow - Use KM-913-A or a 15 mm flex-head spanner (2) Insert KM-6130 or a 4.5mm drift (1) 
|
|
| 5. |
Fit the multi-belt
Instruction: Check the fitting position. Undo the multi-belt tensioning device - Use KM-913-A Remove KM-6130 |
|
| 6. |
Fit the wing liner at the front
|
|
| 7. |
Lower the car
|
|
| 8. |
Close the bonnet
|
|
