PRE-RELEASE
Oil pressure switch, removing and fitting
| Oil pressure switch, removing and fitting |
| 1. |
Pull off the cable set connector (1) from the oil pressure switch.
|
|
| 2. |
Remove the oil pressure switch (2) from the oil pump - put a receptacle underneath.
|
|
| To fit |
| 1. |
Fit the oil pressure switch with a new sealing ring onto the oil pump - tightening torque 30 Nm.
|
|
| 2. |
Put the cable set connector back onto the oil pressure switch.
|
|
| 3. |
Check the engine oil level, adjust as necessary.
|
|
