PRE-RELEASE
Ignition module, removing and fitting
| Ignition module, removing and fitting |
| 1. |
Remove the engine protection cover.
|
|
| 2. |
Pull off the cable set connector (2) from the ignition module (3).
|
|
| 3. |
Remove the ignition module from the camshaft cover and pull it off from the spark plug with KM-6009
(83 96 335 Removal tool, ignition discharge module Z18XE
(1).
|
|
| 4. |
Put the ignition module onto the spark plugs and fit it onto the camshaft cover - tightening torque 8 Nm.
|
|
| 5. |
Fit the ignition module cable set connector.
|
|
| 6. |
Fit the engine cover.
|
|
