PRE-RELEASE
Rear crankshaft seal
| Rear crankshaft seal |
| To remove |
| 1. |
Remove the gearbox, see
Manual gearbox assembly, Z19
or
Automatic transmission assembly Z19DTH
.
|
|
| 2. |
Aut
: Remove the driver plate.
|
|
| 3. |
Man
: Remove
Flywheel.
|
|
| 4. |
Remove
Oil sump in car.
.
|
|
| 5. |
Remove the bolts.
|
|
| 6. |
Remove the crankshaft sealing ring.
|
|
| To fit |
| 1. |
Clean the sealing surface.
|
|
| 2. |
Fit the crankshaft sealing ring using
32 025 044 Fitting tool, crankshaft seal
.
|
|
| 3. |
Fit the bolts.
Tightening torque 9 Nm (6 lbf ft). 
|
|
| 4. |
Fit
Oil sump in car
|
|
| 5. |
Man
: Fit
Flywheel
.
|
|
| 6. |
Aut
: Fit the driver plate. Use
Thread locking adhesive, Loctite 270
.
Tightening torque 160 Nm (118 lbf ft) |
|
| 7. |
Fit the gearbox, see
Manual gearbox assembly, Z19
or
Automatic transmission assembly Z19DTH
.
|
|
