Solenoid valve, EGR (606), Z19DTH
|
|
Solenoid valve, EGR (606), Z19DTH
|
|
1.
|
Remove the engine cover.
|
|
2.
|
Remove the two bolts holding the EGR pipe.
|
|
3.
|
Remove the solenoid valve unit connector.
|
|
4.
|
Remove the engine cover mounting.
|
|
5.
|
Remove the four bolts on the solenoid valve unit. Lift away the unit.
|
|
1.
|
Clean the sealing surfaces and use a new gasket.
|
|
2.
|
Fit the solenoid valve unit.
Tightening torque 25 Nm (18 lbf ft).
|
|
3.
|
Fit the engine cover mounting.
|
|
4.
|
Fit the solenoid valve unit connector.
|
|
5.
|
Clean the EGR pipe sealing surfaces, use a new gasket. Fit the EGR pipe.
|
|
6.
|
Fit the engine cover.
|
