Level sensor, engine oil (243)
|
|
Level sensor, engine oil (243)
|
The level switch is used on engine variant B207R only
|
1.
|
Remove the oil sump as described in
Oil sump
.
|
|
2.
|
Remove the connector clip.
|
|
3.
|
Make a note of how the cables are run and secured.
|
|
4.
|
Remove the oil level sensor.
|
|
1.
|
Fit the oil level sensor to the oil pan.
|
|
2.
|
Fit the connector with a new O-ring sparingly lubricated with Vaseline.
|
|
3.
|
Check the location of the cables and that they are secured properly, adjust as necessary.
|
|
4.
|
Fit the retaining clip.
|
|
5.
|
Fit the oil sump as described in
To fit
.
|
