Oil pressure, check, Z19DTH
|
|
Oil pressure, check, Z19DTH
|
|
Important
|
|
When checking at full load the handbrake must be applied and the brake pedal depressed. Due to the risk of overheating, checking at full load must not take longer than 5 seconds. Add a pause for cooling down. The oil level in the gearbox must be correct.
|
|
|
|
2.
|
Remove the lower engine cover.
|
|
3.
|
Remove the upper plug (A). The front torque rod has been removed in the illustration to give a better view of the connections.
Warning
|
|
The radiator fan may start without warning. Keep your fingers away to avoid injury.
|
|
|
|
|
|
|
|
6.
|
Lower the car to the floor.
|
|
7.
|
Connect TECH 2 and check the oil temperature.
|
Important
|
|
The oil temperature must be between 50 degrees C and 80 degrees C.
|
|
|
|
|
8.
|
Check the oil pressure in selector lever position "D".
|
|
|
•
|
Move the selector lever to position "D".
|
|
|
•
|
Check the oil pressure at idling speed and at full load - air conditioning and lighting disengaged.
- Desired value idling speed (foot brake not applied): 3.7 - 4.1 bar.
- Desired value full load: 13.5 - 14.6 bar.
|
|
|
•
|
Switch off the engine after the check.
|
|
10.
|
Remove the oil pressure gauge (B).
|
|
11.
|
Remove the connection (A).
|
|
12.
|
Fit the upper plug (A) with a new sealing ring
|
|
|
•
|
Tighten the plug 10 Nm.
|
|
13.
|
Remove the lower plug (B).
|
|
16.
|
Lower the car to the floor.
|
|
17.
|
Connect TECH 2 and check the oil temperature.
|
Important
|
|
The oil temperature must be between 50 degrees C and 80 degrees C.
|
|
|
|
|
18.
|
Check the oil pressure in selector lever position "R".
|
|
|
•
|
Move the selector lever to position "R".
|
|
|
•
|
Check the oil pressure at idling speed and at full load - air conditioning and lighting disengaged.
- Desired value idling speed 5.7 - 6.6 bar.
- Desired value full load: 19.0 - 21.3 bar.
|
|
|
•
|
Switch off the engine after the check.
|
|
20.
|
Remove the oil pressure gauge (B).
|
|
21.
|
Remove the connection (A).
|
|
22.
|
Fit the lower plug (B) with a new sealing ring
|
|
|
•
|
Tighten the plug 10 Nm.
|
|
23.
|
Lower the car to the floor.
|
